Model and Mould Construction
Processing material with the highest possible precision is an essential success factor in the production of models and moulds. The casted part must need as little post-processing efforts as possible, abiding by any predetermined material tolerance. High quality claims to the mould's surface imply the use of a suitable, high quality mould release agent in order to meet the specifications required.
Post processing steps, such as gluing, painting or coating of the casting imply further requirements on the release agent being used. Münch Chemie International has accepted this challenge. The release agent technology designed in our labs offers excellent compatibility to the processing material. Our release agents are specifically developed to incorporate with further processing steps, rendering intermediate procedures like surface treatments unnecessary.
Our product range offers process aids for any material being used in model and moulds constructions, from hand lay-up laminate, SMC/BMC, vacuum injection moulding up to pre-preg aided manufacturing. Experience our innovative, high-quality system solutions to master any of your processing-related issues.
NEW Release Agent
• especially for polymer concrete
production
• liquid wax which can be applied
easily
• Release film resistant against
abrasive fillers
view detailed information
NEW Release Paste for the composite sector
• Improved version of the successful
release paste MP-7017
• Better polishing
view detailed information
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
view detailed information
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
view detailed information
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
view detailed information
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
view detailed information
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
view detailed information
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
view detailed information
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
view detailed information
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
view detailed information
Internal release agents -
(2)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
view detailed information
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
view detailed information