Piezas técnicas
Conocemos bien el mundo de la goma. En nuestro caso, la venta de desmoldeantes no se realiza en la oficina de ventas. Para entender los requerimientos de nuestros clientes, vamos directamente al lugar de aplicación para detectar el problema. Los empleados del servicio exterior están formados en las áreas industriales en las que asisten al cliente.
Las historias de Charles Goodyear y John Boyd Dunlop, que pasó de granjero a productor de neumáticos, también son conocidas para nosotros, igual que el modo de escritura de caucho alcrilnitilo-butadieno (NBR). El entendimiento de los materiales y las necesidades de nuestros clientes nos permite desarrollar productos específicos para una finalidad. Una escuela técnica completamente equipada nos ofrece la posibilidad de probar los productos previamente antes de obstruir la capacidad de producción de nuestros clientes.
NEW Release Agent
• especially for polymer concrete
production
• liquid wax which can be applied
easily
• Release film resistant against
abrasive fillers
Vuelta a página de detalles
NEW Release Paste for the composite sector
• Improved version of the successful
release paste MP-7017
• Better polishing
Vuelta a página de detalles
Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
Vuelta a página de detalles
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
Vuelta a página de detalles
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
Vuelta a página de detalles
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
Vuelta a página de detalles
Bladder Coating, especially developed for the production of driving belts
- water based
- semi-permanent
- improved surface quality of the
finished product
Vuelta a página de detalles
Bladder Release Agent for the production of Air Spring Systems
- water-based
- semi-permanent
- improved surface quality of the
finished product
Vuelta a página de detalles
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
Vuelta a página de detalles
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
Vuelta a página de detalles
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
Vuelta a página de detalles
Solvent-based, wax-containing release agent, specifically developed for the purpose of processing polymer concrete.
Vuelta a página de detalles
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
Vuelta a página de detalles
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
Vuelta a página de detalles
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Vuelta a página de detalles
Silicone-free multi-purpose release agent, suited for the purpose of processing thermoplastics. Even small quantities result in superior release effect.
Vuelta a página de detalles
Silicone-free multi-purpose release agent, suited for the purpose of processing thermoplastics. Even small quantities result in superior release effect.
Vuelta a página de detalles
Suitable for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
Vuelta a página de detalles
Release Agent for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
Vuelta a página de detalles
Semi-permanent, external release agent, free from solvents andsuited for Rotation Molding with any kind of elastomer.
Vuelta a página de detalles
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
Vuelta a página de detalles
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
Vuelta a página de detalles
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
Vuelta a página de detalles
Solvent-free heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface even at room temperature.
Vuelta a página de detalles
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Vuelta a página de detalles
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
Vuelta a página de detalles
SAN-based cleaning compound for extruders and injection machines for the purpose of processing thermoplastics
Vuelta a página de detalles
PE-based cleaning compound for extruders and injection machines for the purpose of processing thermoplastics
Vuelta a página de detalles
Screw cleaner for the purpose of processing thermoplastics in extrusion and injection moulding machines. The careful selection of high grade additives empower you to cut down on time, material and overall costs at once. At the same time, ScrewClean SR-47®
Vuelta a página de detalles
Protección anticorrosiva -
(1)
Internal release agents -
(3)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
Vuelta a página de detalles
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
Vuelta a página de detalles
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
Vuelta a página de detalles