Wind Power
Wind or rotor blades aren't simply GRP- or CRP-component parts. Wind blades represent high tech engineered elements to meet quality standards comparable to those specified by the aerospace industry. Typically, high quality standards are a essential demands to be met by any of the substances or materials being processed.
A wide variety of requirements affect implemented application techniques due to the sheer size of the moulds being used during the production process. This eventually raises the importance of the release agent technology adopted, to help eliminating any of the formerly known, processing-related issues. This change of the customer's quality expectation implies a re-evaluation of the release agent technology adopted , to represent a critical success factor.
The development of our release technology takes place on-site, right at your manufacturing plant. Our global network of distributors allows us to supply you with field-tested release agents, based on the latest technology the marketplace can offer.
We are excited sharing the latest achievements in release agent technology with a partner like you.
NEW Release Agent
• especially for polymer concrete
production
• liquid wax which can be applied
easily
• Release film resistant against
abrasive fillers
view detailed information
NEW Release Paste for the composite sector
• Improved version of the successful
release paste MP-7017
• Better polishing
view detailed information
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
view detailed information
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
view detailed information
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
view detailed information
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
view detailed information
High-end water-based release agent, releases certainly Prepeg, epoxy, vinyl and polyester resins, even PU-gel coats are released.
view detailed information
Water-based release agent, quickly ventilating, especially for epoxy resins.
Excellent to use at high temperatures with long performance.
view detailed information
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
view detailed information
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
view detailed information
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
view detailed information
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
view detailed information
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
view detailed information
Internal release agents -
(2)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
view detailed information
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
view detailed information