Münch Chemie International
分离剂专家

Outside Lube OP-4141

用途: 其它

Outside Lube OP-4141 has been specifically developed for the tire industry to treat the surface of green tire with a high-quality lubricant.

Though water-based and free of solvents, Outside Lube OP-4141 provides relatively short drying times. An improvement of the rubber flow properties, good release and a reduction of the build-up on the moulds are the result of its excellent performance. The special properties of Outside Lube OP-4141 prevent knit-lines and other visual defects from appearing during the vulcanisation process.

Outside Lube OP-4141 is suitable for the production of any type of tire.

物产

  • 无溶液的配方
  • 分离效果优良
  • 滑脱效应出色
  • 避免表面出现光学缺陷
  • 有助于避免出现焊缝
  • 水基化制剂
  • 通风时间缩短
  • 减少模具表面的废料
  • 改善所使用混合物的流动性

应用领域

  • 所有通用轮胎型号
  • 轮胎坯料

文件

包装单位

铁桶
集装桶
约 200 ltr.
约 1000 ltr.

应用实例

产品

  • 橡胶

行业解决方案

  • 汽车配件供应商
  • 轮胎工业

Unsere Kombinationsempfehlungen und passendes Zubehör

Release Agent MK-100
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Release Agent MK-100 Spray
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
Release Agent MK-122/5 LS
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
Release Agent MK-200
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-222/G5
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
Release Agent MK-2500
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
Release Agent MK-4103
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-4104
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-444
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
Release Agent MK-51/11
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
Release Agent MK-57/11
Water-based, semi-permanent release agent, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-57/11 Spray
Water-based, semi-permanent release agent spray, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-58/15/G5
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Release Agent MK-7070
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Lubricant MK-7078
Crosslinking lubricant for the coating of profiles.
Release Agent MK-7082/G2
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
Release Agent MK-7083/11/G5
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
Release Agent MK-7085/11/G5
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Release Agent MK-7107/1
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
Release Agent MK-7107/2
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Release agent of the MK-series