Münch Chemie International
分离剂专家

Release Agent MK-2500

用途: 分离剂

Release Agent MK-2500 is a water-based release agent concentrate, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperatures higher than 200°C.

Release Agent MK-2500 develops a strong chemical bonding to most mould materials, thus provides multiple releases per application. Release Agent MK-2500 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Dilutions of Release Agent MK-2500 are suited as a release agent for the processing of all rubber types except silicone-rubber.Release Agent MK-2500 can be diluted up to 1:100 with water. The use of demineralized water is highly recommended.

物产

  • 无溶液的配方
  • 浓缩产品，使用之前必须稀释
  • 半永久性产品： 每个任务可重复脱模
  • 不会传递到成品部件
  • 适用于研磨介质的加工
  • 耐热性大约达到 200°C
  • 对没有经过预处理的成品部件精加工
  • 水基化制剂
  • 减少模具表面的废料

应用领域

  • 所有通用轮胎型号
  • 除硅橡胶以外的所有合成橡胶类型

文件

包装单位

铁桶
集装桶
约 200 ltr.
约 1000 ltr.

应用实例

产品

  • 橡胶

行业解决方案

  • 汽车配件供应商
  • 橡胶 – 金属复合材料
  • 轮胎工业

Unsere Kombinationsempfehlungen und passendes Zubehör

Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Batch-Off Release Agent RP-10/1
Pigmented batch off-release agent with high wetting effect and optimized release properties.
Batch-Off Release Agent RP-6
FDA-approved batch off-release agent with high wetting effect and optimized release properties.