Münch Chemie International
分离剂专家

Release Agent MK-57/11

用途: 分离剂

Release Agent MK-57/11 is a water-based "ready-to-use" release agent, forming a coherent release film on the mould. Though this film is micro thin, it is after cure very resistant and temperature stable up to 300°C.

Release Agent MK-57/11 develops a strong chemical bonding to most mould materials and thus provides a high number of releases per application.
Release Agent MK-57/11 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build up on the moulds caused by depositions of pigments, anti aging agents, resin residues etc. is reduced considerably. Because of the hardness of the release film parts produced with Release Agent MK-57/11 will have a matte surface.

Release Agent MK-57/11 has been developed for processing with peroxide cured EPDM- and HNBR- compounds as well as fluoric compounds. The product is suitable for any other kind of compound and curing system as well, except silicone rubber.

物产

  • 无溶液的配方
  • 可形成无光泽表面
  • 准备使用的产品
  • 半永久性产品： 每个任务可重复脱模
  • 耐热性大约达到 300°C
  • 对没有经过预处理的成品部件精加工
  • 水基化制剂
  • 减少模具表面的废料

应用领域

  • 过氧化物浸渍的 EPDM 混合物
  • 过氧化物浸渍的 HNBR 混合物
  • 氟化碳橡胶

文件

包装单位

铁桶
集装桶
约 200 ltr.
约 1000 ltr.

应用实例

产品

  • 橡胶

行业解决方案

  • 汽车配件供应商
  • 橡胶 – 金属复合材料

Unsere Kombinationsempfehlungen und passendes Zubehör

Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Batch-Off Release Agent RP-10/1
Pigmented batch off-release agent with high wetting effect and optimized release properties.
Batch-Off Release Agent RP-6
FDA-approved batch off-release agent with high wetting effect and optimized release properties.