汽车配件供应商
汽车工业的基本需求是对已生产零部件进行再加工。在大多数情况下，要对每个零部件进行涂层（包括涂漆、粉末涂层、镀铬等）。
Münch Chemie International 为此提供了专业的解决方案。在最初的研发阶段，就将产品设计为无需其它前期准备就可以直接进行表面处理。通过有针对性地选择材料，我们排除了有害物质-硅。2005 年在波兰 Kielce 举办的压力铸造博览会上，我们的产品获得了最佳表面涂层创新产品奖，而这只是我们获得众多荣誉中的一个。
NEW Release Agent, especially for mould construction block material
- No varnishing necessary on the surface
详细信息
Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
详细信息
Crosslinking lubricant for the coating of profiles.
详细信息
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
详细信息
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
详细信息
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
详细信息
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
详细信息
Bladder Coating, especially developed for the production of driving belts
- water based
- semi-permanent
- improved surface quality of the
finished product
详细信息
Bladder Release Agent for the production of Air Spring Systems
- water-based
- semi-permanent
- improved surface quality of the
finished product
详细信息
Water-based release agent, excellent substitude for solvents. Free of silicone and waxes to help obtaining bright, homogenous surfaces.
详细信息
Water-based release agent concentrate for most die casting-applications.
详细信息
Wax-free release agent concentrate for aluminum-die casting applications, suited for heavy castings that require high structural stability.
详细信息
Water-based release agent concentrate for magnesium-die casting to meet the requirements of the automotive industry.
详细信息
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
详细信息
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
详细信息
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
详细信息
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
详细信息
High-end water-based release agent, releases certainly Prepeg, epoxy, vinyl and polyester resins, even PU-gel coats are released.
详细信息
Water-based release agent, quickly ventilating, especially for epoxy resins.
Excellent to use at high temperatures with long performance.
详细信息
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
详细信息
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
详细信息
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
详细信息
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
详细信息
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
详细信息
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
详细信息
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
详细信息
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
详细信息
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
详细信息
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
详细信息
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
详细信息
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
详细信息
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
详细信息
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
详细信息
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
详细信息
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
详细信息
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
详细信息
Water-based, silicone-free release agent for the automotive industry. High surface quality of the casted parts and well suited for filled and unfilled RIM-systems.
详细信息
Suitable for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
详细信息
Water-based release agent for PU-rigid and PU-integral foams in polyether- and polyester-systems. Allows the release of not yet fully cured parts.
详细信息
Water-based, solvent-free release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
详细信息
Water-based, semi-permanent release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
详细信息
release agent for phenolic resin bonded cotton fibre sheets. Works well in steam-supported applications and creates a fairly hard release film
详细信息
Release Agent for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
详细信息
Solvent-based release agent for the purpose of processing PU-rigid foams and cast uerthane in polyesther- and polyether-systems.
详细信息
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
详细信息
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
详细信息
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
详细信息
Internal additive for the purpose of processing PU-elastomers, PU-rigid and PU-integral foams in RIM-, RRIM-& SRIM-systems.
详细信息
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
详细信息
Additive to reduce surface tension in gelcoats.
详细信息
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
详细信息
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
详细信息
Aqueous Coating for ladles and other tools. More related coatings on request.
详细信息
Crosslinking lubricant for the coating of profiles.
详细信息
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
详细信息
Lubricant MK-YG/20 H is a water-based, ready-to-use lubricant, specifically developed as a mounting lubricant for the mounting of tires onto rims.
详细信息
Lubricant MK-YG/20 V is a water-based, ready-to-use lubricant, specifically developed as a mounting lubricant for the mounting of tires onto rims.
详细信息
water-based, "ready-to-use" process aid that helps, mounting tires on the rim. Fast evaporating product, yet free of solvents and silicones.
详细信息
Water-based, soap-free concentrated lubricant as mounting aid for tires on automated tire uniformity testing equipment.
详细信息
Water-based heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface
详细信息
Solvent-free heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface even at room temperature.
详细信息
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
详细信息
Recyclable high-performance Cleaner, suited to rinse pipes and casting heads of low-pressure PU-machines.
详细信息
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
详细信息
Internal release agents -
(3)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
详细信息
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
详细信息
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
详细信息
Aqueous Coating for ladles and other tools. More related coatings on request.
详细信息
Classic, black outside tire paint for any type of tire. The Lubricant features a water-based formultaion and increases the flowability of the compound.
详细信息
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
详细信息