模型和模具制造
制造模型或模具时，高度的精确性是必不可少的成功因素。 必须尽可能少地修整利用模具制造出来的部件，同时必须遵守以生产为条件的材料公差。 因此，对模具表面的质量提出了最高质量要求，如果不使用适当的模型分型剂，就不可能达到规定要求。
此外，大多数成品部件的成功再处理，例如粘贴、涂漆或镀层，也对所使用的分型剂提出了广泛要求。 Münch Chemie International 十分关注这一难题。 由我们研发的脱模系统在研发周期内已体现出与后续生产步骤的巨大兼容性。 因此，无须事先处理成品部件表面，直接进行精加工，节省时间。
我们的产品程序具备所有模型和模具制造领域的过程帮助，包括通过 SMC/BMC 完成的手工铺贴层合塑料、真空喷射工艺和预浸坯料。 我们拥有高效的创新系统解决方案，帮您解决生产问题。
NEW Release Agent
• especially for polymer concrete
production
• liquid wax which can be applied
easily
• Release film resistant against
abrasive fillers
详细信息
NEW Release Paste for the composite sector
• Improved version of the successful
release paste MP-7017
• Better polishing
详细信息
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
详细信息
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
详细信息
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
详细信息
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
详细信息
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
详细信息
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
详细信息
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
详细信息
Additive to reduce surface tension in gelcoats.
详细信息
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
详细信息
Internal release agents -
(2)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
详细信息
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
详细信息