Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
Water-based, silicone-free release agent for the automotive industry. High surface quality of the casted parts and well suited for filled and unfilled RIM-systems.
Water-based release agent for PU-rigid and PU-integral foams in polyether- and polyester-systems. Allows the release of not yet fully cured parts.
Release Agent for the purpose of processing PU foams:
- reduced solid content
- all-purpose for the PU sector
- surface quality meets automobile requirements
Solvent-based release agent for the purpose of processing PU-rigid foams and cast uerthane in polyesther- and polyether-systems.
Solvent-based, "ready-to-use"-release agent for the purpose of processing PU-rigid / PU-integral foams and cast urethane.
Solvent-based, "ready-to-use"-release agent forthe purpose of processing PU-integral / PU-rigid foams and cast urethanes.
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
Internal additive for the purpose of processing PU-elastomers, PU-rigid and PU-integral foams in RIM-, RRIM-& SRIM-systems.
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
Recyclable high-performance Cleaner, suited to rinse pipes and casting heads of low-pressure PU-machines.
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
电话:+49 6201 9983-14
传真:+49 6201 9983-66
You are looking for a new product for the rotational moulding sector?
We can offer you the right product:
- eco- friendly
- excellent cost-performance ratio
Münch-Chemie to present at IRC Paris MK-228/11,
a new generation of release agent for every type of rubber compounds
Tire Technology Expo 201214th – 16th February 2012 in Cologne, Germany
We have shown a successful presence at the fair. Many customers and trade visitors enquired about our products.