Shoe Industry
Today, shoes are complex products. Even the sole is made of many components. For cost-related reasons, process aids that are used during the production have to be very efficient and may not change the properties of the materials used.
Due to its stickiness, polyurethane as a material that is very often used in the manufacture of soles requires a release agent. Here, Münch Chemie International offers the most innovative solution: instead of a traditional release agent, which is sprayed into the mould, Münch Chemie International offers an additive to the polyol. This additive does not change the physical properties of the PU system but leads to a release effect so that an external release agent is no longer required. The adhesion, even during the production of double-density soles, is not limited.
Heady-duty, solvent-based cleaning agent to remove deposits of former release agent, rubber, epoxy-, polyester- and phenolic resins from metal surfaces.
view detailed information
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
view detailed information
Highly efficient release agent concentrate for the purpose of manufactoring shoe soles and boots. Post processing-capabilities are not effected.
view detailed information
Solvent-based, silicone-free release agent for PU- ether and -esther systems for the automotive industry, suited for absorbers, etc.
view detailed information
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
view detailed information
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
view detailed information
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
view detailed information
Solvent-based, "ready-to-use"-release agent for the purpose of processing PU-rigid / PU-integral foams and cast urethane.
view detailed information
Solvent-based, "ready-to-use"-release agent forthe purpose of processing PU-integral / PU-rigid foams and cast urethanes.
view detailed information