Münch Chemie International
The Release Agent Specialist

Additive Mikon® INT-250

Application: Internal release agents

Additive Mikon® INT-250 is a liquid internal release agent for the processing of composites.

This product eliminates the need for any external release agent and polishing. Because of its release power, a smooth release is obtained. Any post-moulding operation such as painting, glueing, printing etc. can be performed without having to prepare the part before.

Additive Mikon® INT-250 will not have an influence on the chemical and physical properties of the resin. Additive Mikon® INT-250 does not contain any silicones or waxes and is used as internal release agent for polyester resins (pultrusion, gel-coated and non gel- coated parts).

Product Characteristics

  • High release effect
  • Wax-free formulation
  • Does not impair the chemical or physical characteristics of the resin
  • Creates smooth surfaces
  • Further processing of the casting without prior treatment
  • Silicone-free formulation
  • Helps minimizing the need for additional external release agents and lubricants

Suitable Application Areas

  • Polyester
  • Gelcoat

Packaging

Can
Drum
approx. 30 ltr.
approx. 200 ltr.

This product is suitable for the following application fields

Products

  • Plastics
  • GRP/CRP Composite materials

Industry Solutions

  • Automotive Suppliers
  • Aerospace Industry
  • Technical Components
  • Wind Power
  • Model and mould construction

Recommended accessories and product combinations

Release Agent Mikon® F-57
Solvent-based, semi-permanent release agent, suited for the purpose of processing polymer concrete.
Additive Mikon® INT-260
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
Additive Mikon® INT-672
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
Release Agent Mikon® MG-9006
Solvent-based, wax-containing release agent, specifically developed for the purpose of processing polymer concrete.
Additive Mikon® MIK-255
Additive to reduce surface tension in gelcoats.
Sealer Mikon® 699 MC
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
Sealer Mikon® W-29
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
Cleaner R-51
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.