Münch Chemie International
The Release Agent Specialist

Release Agent MK-200

Application: Release Agents

Release Agent MK-200 is a water-based, ready-to-use release agent, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperature stable up to 300°C.

The product contains a slip agent, resulting in remarkably smooth surfaces, drastically reducing the friction between the elastomer and the release agent. Nevertheless, the strong chemical bonding to most mould materials, providing multiple releases per application, is not impaired.

Release Agent MK-200 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Release Agent MK-200 is suited as a release agent for the processing of all rubber types except silicone- rubber.

Product Characteristics

  • Solvent-free formulation
  • High slip effect
  • Ready-to-use product
  • Semi-permanent product: multiple releases per application
  • No transfer to the casted parts
  • Suited for the purpose of processing abrasive materials
  • Temperature stable up to 300°C
  • Further processing of the casting without prior treatment
  • Water-based formulation
  • Minimizes residues on the mould surface

Suitable Application Areas

  • All elastomers except silicone-rubber

Documents

Packaging

Can
Drum
approx. 10 ltr.
approx. 200 ltr.

This product is suitable for the following application fields

Products

  • Rubber

Industry Solutions

  • Automotive Suppliers
  • Rubber to metal bonding
  • Technical Components
  • Wind Power
  • Model and mould construction

Recommended accessories and product combinations

Release Agent MK-100
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Release Agent MK-7085/11/G5
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Release Agent MK-7107/2
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.