Münch Chemie International
The Release Agent Specialist

Release Agent MK-444

Application: Release Agents

Release Agent MK-444 is a water-based, ready-to-use release agent, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperature stable up to 300°C.

The product contains a slip agent, resulting in remarkably smooth surfaces, drastically reducing the friction between the elastomer and the release agent. Nevertheless, the strong chemical bonding to most mould materials, providing multiple releases per application, is not impaired.

Release Agent MK-444 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Release Agent MK-444 is suited as a release agent for the processing of all rubber types except silicone- rubber. Especially in tire manufacturing Release Agent MK-444 has proven its suitability with any kind of common types of tires.

Product Characteristics

  • Solvent-free formulation
  • Ready-to-use product
  • Semi-permanent product: multiple releases per application
  • No transfer to the casted parts
  • Suited for the purpose of processing abrasive materials
  • Temperature stable up to 300°C
  • Further processing of the casting without prior treatment
  • Water-based formulation
  • Minimizes residues on the mould surface

Suitable Application Areas

  • All common tire types
  • All elastomers except silicone-rubber

Documents

Packaging

Can
Drum
approx. 10 ltr.
approx. 200 ltr.

This product is suitable for the following application fields

Products

  • Rubber

Industry Solutions

  • Automotive Suppliers
  • Rubber to metal bonding
  • Tire Industry

Recommended accessories and product combinations

Bladder Release BC-3156
Water-based, single-component bladder coating. Lasts throughout the whole bladder-lifetime.
Bladder Release BC-9020
Permanent water-based coating for turn-up bladders to improve the release effect between bladder and 1st ply.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-222/G5
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.