Münch Chemie International
El especialista en desmoldeantes

Outside Lube OP-6266

Solicitud: Otros

Outside Lube OP-6166 has been specifically developed for the tire industry to treat the surface of the green tire with a high quality lubricant.

Though water based and free of solvents, Outside Lube OP-6166 provides relatively short drying times. An improvement of the rubber flow properties, good release and a reduction of the build-up on the moulds are the result of its excellent performance. The special properties of Outside Lube OP-6166 during the vulcanisation process prevent knit-lines and other visual defects from appearing.

Outside Lube OP-6266 eignet sich für die Produktion von allen Reifentypen.

Propiedades

  • Fórmula sin disolventes
  • Elevado efecto antiadherente
  • Elevado efecto deslizante
  • Evita las deficiencias estéticas sobre las superficies
  • Ayuda a evitar costuras soldadas
  • Fórmula basada en agua
  • Tiempo de ventilación breve
  • Minimiza los restos sobre la superficie del molde
  • Mejora el comportamiento de flujo de la mezcla aplicada

Aptidud del material

  • Todos los tipos de neumáticos convencionales
  • Pieza en bruto para neumático

Documentos

Unidad de embalaje

Bidón
Contenedor
aprox. 200 ltr.
aprox. 1000 ltr.

Este producto es utilizado en el siguiente contorno

Productos

  • Goma

Solutiones Sectoriales

  • Proveedores de automóviles
  • Industria de neumáticos

Nuestra combinación de recomendaciones y accesorios a juego

Inside Lube IP-7040
Water-based inside tire paint, specifically designed to coat the green tire with a high-quality inside paint.
Inside Lube IP-7045
Classic, pigmented inside lubricant, natural colour and water-based.
Inside Lube IP-7061
Semi-permanent, water-based inside lubricant for the application either on the bladder surface or on the inside of the green tire. Excellent results in combination with truck- or earthmover-class tires.
Inside Lube IP-8053
Semi-permanent inside lubricant for all commen tire types, including low profile tires (HP and UHP range).
Release Agent MK-100
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Release Agent MK-100 Spray
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
Release Agent MK-122/5 LS
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
Release Agent MK-200
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-222/G5
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
Release Agent MK-2500
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
Release Agent MK-4103
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-4104
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-444
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
Release Agent MK-51/11
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
Release Agent MK-57/11
Water-based, semi-permanent release agent, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-57/11 Spray
Water-based, semi-permanent release agent spray, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-58/15/G5
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Release Agent MK-7070
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Lubricant MK-7078
Crosslinking lubricant for the coating of profiles.
Release Agent MK-7082/G2
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
Release Agent MK-7083/11/G5
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
Release Agent MK-7085/11/G5
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Release Agent MK-7107/1
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
Release Agent MK-7107/2
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Release agent of the MK-series