Münch Chemie International
El especialista en desmoldeantes

Release Agent MK-200

Solicitud: Desmoldeante

Release Agent MK-200 is a water-based, ready-to-use release agent, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperature stable up to 300°C.

The product contains a slip agent, resulting in remarkably smooth surfaces, drastically reducing the friction between the elastomer and the release agent. Nevertheless, the strong chemical bonding to most mould materials, providing multiple releases per application, is not impaired.

Release Agent MK-200 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Release Agent MK-200 is suited as a release agent for the processing of all rubber types except silicone- rubber.

Propiedades

  • Fórmula sin disolventes
  • Elevado efecto deslizante
  • Producto listo para aplicar
  • Producto semipermanente: posibilidad de desmoldeos múltiples por aplicación
  • Sin transferencia a las piezas terminadas
  • Apropiado para el procesamiento de medios abrasivos
  • Resistente a la temperatura hasta aprox. 300 °C
  • Procesamiento posterior de las piezas terminadas sin tratamiento previo
  • Fórmula basada en agua
  • Minimiza los restos sobre la superficie del molde

Aptidud del material

  • Todos los tipos de elastómero excepto cauchosilicona

Documentos

Unidad de embalaje

Lata
Bidón
aprox. 10 ltr.
aprox. 200 ltr.

Este producto es utilizado en el siguiente contorno

Productos

  • Goma

Solutiones Sectoriales

  • Proveedores de automóviles
  • Uniones de goma-metal
  • Piezas técnicas
  • Energía eólica
  • Construcción de modelos y moldes

Nuestra combinación de recomendaciones y accesorios a juego

Release Agent MK-100
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Release Agent MK-7085/11/G5
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Release Agent MK-7107/2
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.