Münch Chemie International
El especialista en desmoldeantes

Release Agent MK-4103

Solicitud: Desmoldeante

Release Agent MK-2500 is a water-based release agent concentrate, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperatures higher than 200°C.

Release Agent MK-2500 develops a strong chemical bonding to most mould materials, thus provides multiple releases per application. Release Agent MK-2500 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Dilutions of Release Agent MK-2500 are suited as a release agent for the processing of all rubber types except silicone-rubber.

Propiedades

  • Fórmula sin disolventes
  • Producto listo para aplicar
  • Aumenta el intervalo de tiempo entre los intervalos de limpieza del molde
  • Fórmula basada en agua
  • Mejora el comportamiento de flujo de la mezcla aplicada

Aptidud del material

  • Moldeo en caliente
  • Cauchosilicona
  • Mezclas reticuladas peroxídicas

Documentos

Unidad de embalaje

Lata
Bidón
aprox. 30 ltr.
aprox. 200 ltr.

Este producto es utilizado en el siguiente contorno

Productos

  • Goma

Solutiones Sectoriales

  • Proveedores de automóviles
  • Uniones de goma-metal

Nuestra combinación de recomendaciones y accesorios a juego

Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Batch-Off Release Agent RP-10/1
Pigmented batch off-release agent with high wetting effect and optimized release properties.
Batch-Off Release Agent RP-6
FDA-approved batch off-release agent with high wetting effect and optimized release properties.