Münch Chemie International
El especialista en desmoldeantes

Release Agent MK-57/11 Spray

Solicitud: Desmoldeante

Release Agent MK-57/11 Spray is a water-based "ready-to-use" release agent, forming a coherent release film on the mould. Though this film is micro thin, it is after cure very resistant and temperature stable up to 300°C.

Release Agent MK-57/11 Spray develops a strong chemical bonding to most mould materials and thus provides a high number of releases per application. Release Agent MK-57/11 Spray does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build up on the moulds caused by depositions of pigments, anti aging agents, resin residues etc. is reduced considerably. Due to the hardness of the release film parts produced with Release Agent MK-57/11 Spray will have a matte surface.

Release Agent MK-57/11 Spray has been developed for processing with peroxide cured EPDM- and HNBR- compounds as well as fluoric compounds. The product is suitable for any other kind of compound and curing system as well, except silicone rubber.

Propiedades

  • Fórmula sin disolventes
  • Permite superficies mates
  • Producto listo para aplicar
  • Producto semipermanente: posibilidad de desmoldeos múltiples por aplicación
  • Resistente a la temperatura hasta aprox. 300 °C
  • Procesamiento posterior de las piezas terminadas sin tratamiento previo
  • Fórmula basada en agua
  • Minimiza los restos sobre la superficie del molde

Aptidud del material

  • Mezclas EPDM reticuladas peroxídicas
  • Mezclas HNBR reticuladas peroxídicas
  • Fluorocaucho

Documentos

Unidad de embalaje

Caja
12x 0,4 litros de spray

Este producto es utilizado en el siguiente contorno

Productos

  • Goma

Solutiones Sectoriales

  • Proveedores de automóviles
  • Uniones de goma-metal

Nuestra combinación de recomendaciones y accesorios a juego

Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Batch-Off Release Agent RP-10/1
Pigmented batch off-release agent with high wetting effect and optimized release properties.
Batch-Off Release Agent RP-6
FDA-approved batch off-release agent with high wetting effect and optimized release properties.