Münch Chemie International
Le spécialiste des agents de démoulage

Release Agent MK-222/G5

Application: Agent de démoulage

Release Agent MK-222/G5 is a water based ready to use release agent, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after polymerization, even with abrasive materials and temperature stable up to 300°C.

Compared with Release Agent MK-222, this product contains a slip agent, resulting in a remarkably smooth surface, reducing the friction between elastomer and release agent drastically. Nevertheless, the strong chemical bonding to most mould materials is not impaired. Release Agent MK-222/G5 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Release Agent MK-222/G5 is suited as a release agent for the processing of all rubber types except silicone rubber. The product is especially suitable for applications where a high slip effect is needed.

Propriétés

  • Formule sans solvant
  • Effet de glissage élevé
  • Produit prêt à l'emploi
  • Produit semi-permanent : possibilité de multiples démoulages pour chaque application
  • Pas de transfert vers les pieces moulées
  • Adapté au traitement des médias abrasifs
  • Stabilité thermique pour des températures de traitement jusqu’à 300°C
  • Usinage ultérieur du moulage sans traitement préalable
  • Formule à base d’eau
  • Minimise les résidus sur la surface du moulage

Aptitude du matériel

  • Tous les élastomères en dehors des silicone-caoutchouc

Documents

Conditionnement

Fût
Container
env. 200 ltr.
env. 1000 ltr.

Ce produit est utilisé dans le environement suivant

Produits

  • Caoutchouc

Solutions Par Secteur

  • Sous-traitants automobile
  • Jointures caoutchouc-métal
  • Industrie des pneumatiques

Notre combinaison de recommandations et accessoires assortis

Bladder Release BC-3156
Water-based, single-component bladder coating. Lasts throughout the whole bladder-lifetime.
Bladder Release BC-9020
Permanent water-based coating for turn-up bladders to improve the release effect between bladder and 1st ply.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-444
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone