Münch Chemie International
Le spécialiste des agents de démoulage

Release Agent MK-444

Application: Agent de démoulage

Release Agent MK-444 is a water-based, ready-to-use release agent, forming a coherent release film on the mould. Though this film is micro-thin, it is very resistant after cure, even to abrasive materials and temperature stable up to 300°C.

The product contains a slip agent, resulting in remarkably smooth surfaces, drastically reducing the friction between the elastomer and the release agent. Nevertheless, the strong chemical bonding to most mould materials, providing multiple releases per application, is not impaired.

Release Agent MK-444 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build-up on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc. is reduced considerably.

Release Agent MK-444 is suited as a release agent for the processing of all rubber types except silicone- rubber. Especially in tire manufacturing Release Agent MK-444 has proven its suitability with any kind of common types of tires.

Propriétés

  • Formule sans solvant
  • Produit prêt à l'emploi
  • Produit semi-permanent : possibilité de multiples démoulages pour chaque application
  • Pas de transfert vers les pieces moulées
  • Adapté au traitement des médias abrasifs
  • Stabilité thermique pour des températures de traitement jusqu’à 300°C
  • Usinage ultérieur du moulage sans traitement préalable
  • Formule à base d’eau
  • Minimise les résidus sur la surface du moulage

Aptitude du matériel

  • Tous types de pneus ordinaires
  • Tous les élastomères en dehors des silicone-caoutchouc

Documents

Conditionnement

Bidon
Fût
env. 10 ltr.
env. 200 ltr.

Ce produit est utilisé dans le environement suivant

Produits

  • Caoutchouc

Solutions Par Secteur

  • Sous-traitants automobile
  • Jointures caoutchouc-métal
  • Industrie des pneumatiques

Notre combinaison de recommandations et accessoires assortis

Bladder Release BC-3156
Water-based, single-component bladder coating. Lasts throughout the whole bladder-lifetime.
Bladder Release BC-9020
Permanent water-based coating for turn-up bladders to improve the release effect between bladder and 1st ply.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-222/G5
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.