Münch Chemie International
Le spécialiste des agents de démoulage

Release Agent MK-57/11

Application: Agent de démoulage

Release Agent MK-57/11 is a water-based "ready-to-use" release agent, forming a coherent release film on the mould. Though this film is micro thin, it is after cure very resistant and temperature stable up to 300°C.

Release Agent MK-57/11 develops a strong chemical bonding to most mould materials and thus provides a high number of releases per application.
Release Agent MK-57/11 does not transfer to the moulded parts, allowing further processing like varnishing or gluing without subsequent treatment. Build up on the moulds caused by depositions of pigments, anti aging agents, resin residues etc. is reduced considerably. Because of the hardness of the release film parts produced with Release Agent MK-57/11 will have a matte surface.

Release Agent MK-57/11 has been developed for processing with peroxide cured EPDM- and HNBR- compounds as well as fluoric compounds. The product is suitable for any other kind of compound and curing system as well, except silicone rubber.

Propriétés

  • Formule sans solvant
  • Crée une finition mate
  • Produit prêt à l'emploi
  • Produit semi-permanent : possibilité de multiples démoulages pour chaque application
  • Stabilité thermique pour des températures de traitement jusqu’à 300°C
  • Usinage ultérieur du moulage sans traitement préalable
  • Formule à base d’eau
  • Minimise les résidus sur la surface du moulage

Aptitude du matériel

  • Composés réticulés peroxydés EPDM
  • Composés HNBR réticulés peroxydés
  • Elastomères fluorés

Documents

Conditionnement

Fût
Container
env. 200 ltr.
env. 1000 ltr.

Ce produit est utilisé dans le environement suivant

Produits

  • Caoutchouc

Solutions Par Secteur

  • Sous-traitants automobile
  • Jointures caoutchouc-métal

Notre combinaison de recommandations et accessoires assortis

Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Batch-Off Release Agent RP-10/1
Pigmented batch off-release agent with high wetting effect and optimized release properties.
Batch-Off Release Agent RP-6
FDA-approved batch off-release agent with high wetting effect and optimized release properties.