Автомобильные комплектующие
Важным требованием в автомобильной промышленности является дополнительная обработка выпущенных деталей. В большинстве случаев требуется нанесение покрытия (лакировка, порошковое покрытие, хромирование и т.д.) на изготовленные детали.
Компания Münch Chemie International специально позаботилась об этой проблеме. Ещё на этапе разработки изделия конструируются так, чтобы обработка поверхности была возможна без дополнительных подготовительных мер. Благодаря тщательному выбору исходных материалов, силиконовые загрязнения исключены. Вручение награды за инновации на литейной выставке в г. Кильце, Польша в 2005 году за наиболее новаторскую программу продукции, специально оптимизированную применительно к обработке поверхностей - вот лишь одна из многих оценок наших усилий.
Разделительные материалы -
(47)
NEW Release Agent, especially for mould construction block material
- No varnishing necessary on the surface
подробнее
Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
подробнее
Crosslinking lubricant for the coating of profiles.
подробнее
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
подробнее
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
подробнее
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
подробнее
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
подробнее
Bladder Coating, especially developed for the production of driving belts
- water based
- semi-permanent
- improved surface quality of the
finished product
подробнее
Bladder Release Agent for the production of Air Spring Systems
- water-based
- semi-permanent
- improved surface quality of the
finished product
подробнее
Water-based release agent, excellent substitude for solvents. Free of silicone and waxes to help obtaining bright, homogenous surfaces.
подробнее
Water-based release agent concentrate for most die casting-applications.
подробнее
Wax-free release agent concentrate for aluminum-die casting applications, suited for heavy castings that require high structural stability.
подробнее
Water-based release agent concentrate for magnesium-die casting to meet the requirements of the automotive industry.
подробнее
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
подробнее
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
подробнее
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
подробнее
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
подробнее
High-end water-based release agent, releases certainly Prepeg, epoxy, vinyl and polyester resins, even PU-gel coats are released.
подробнее
Water-based release agent, quickly ventilating, especially for epoxy resins.
Excellent to use at high temperatures with long performance.
подробнее
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
подробнее
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
подробнее
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
подробнее
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
подробнее
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
подробнее
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
подробнее
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
подробнее
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
подробнее
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
подробнее
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
подробнее
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
подробнее
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
подробнее
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
подробнее
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
подробнее
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
подробнее
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
подробнее
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
подробнее
Water-based, silicone-free release agent for the automotive industry. High surface quality of the casted parts and well suited for filled and unfilled RIM-systems.
подробнее
Suitable for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
подробнее
Water-based release agent for PU-rigid and PU-integral foams in polyether- and polyester-systems. Allows the release of not yet fully cured parts.
подробнее
Water-based, solvent-free release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
подробнее
Water-based, semi-permanent release agent for the purpose of processing phenolic resin bonded cotton fibre sheets (nonwovens). Works well in steam-supported applications.
подробнее
release agent for phenolic resin bonded cotton fibre sheets. Works well in steam-supported applications and creates a fairly hard release film
подробнее
Release Agent for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
подробнее
Solvent-based release agent for the purpose of processing PU-rigid foams and cast uerthane in polyesther- and polyether-systems.
подробнее
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
подробнее
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
подробнее
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
подробнее
Internal additive for the purpose of processing PU-elastomers, PU-rigid and PU-integral foams in RIM-, RRIM-& SRIM-systems.
подробнее
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
подробнее
Additive to reduce surface tension in gelcoats.
подробнее
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
подробнее
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
подробнее
Средства для улучшения скольжения -
(7)
Aqueous Coating for ladles and other tools. More related coatings on request.
подробнее
Crosslinking lubricant for the coating of profiles.
подробнее
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
подробнее
Lubricant MK-YG/20 H is a water-based, ready-to-use lubricant, specifically developed as a mounting lubricant for the mounting of tires onto rims.
подробнее
Lubricant MK-YG/20 V is a water-based, ready-to-use lubricant, specifically developed as a mounting lubricant for the mounting of tires onto rims.
подробнее
water-based, "ready-to-use" process aid that helps, mounting tires on the rim. Fast evaporating product, yet free of solvents and silicones.
подробнее
Water-based, soap-free concentrated lubricant as mounting aid for tires on automated tire uniformity testing equipment.
подробнее
Water-based heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface
подробнее
Solvent-free heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface even at room temperature.
подробнее
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
подробнее
Recyclable high-performance Cleaner, suited to rinse pipes and casting heads of low-pressure PU-machines.
подробнее
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
подробнее
Internal release agents -
(3)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
подробнее
Aqueous Coating for ladles and other tools. More related coatings on request.
подробнее
Classic, black outside tire paint for any type of tire. The Lubricant features a water-based formultaion and increases the flowability of the compound.
подробнее
High-performance Lubricant, stable even at high temperatures, suited for all wear points, e.g. ejector pins.
подробнее