Модель и пресс-форм
Неотъемлемым фактором успеха при изготовлении моделей и форм является максимально возможная точность. Изготовленная в форме деталь не должна требовать объемной доработки, в то же время должны соблюдаться все обусловленные технологией допуски на материал. Итак, к качеству поверхности формы предъявляются самые высокие требования, выполнить их без применения соответствующих смазок невозможно.
Высокие требования к применяемой смазке предъявляет также осуществляемая в большинстве случаев дополнительная обработка изготовленных деталей, например склеивание, лакирование и покрытие. Компания Münch Chemie International взялась за решение этой проблемы. Разрабатываемые нашей компанией системы разделения рассчитываются на максимально возможную совместимость с дальнейшими стадиями производственного процесса. Таким образом, последующая обработка осуществляется без предварительной обработки поверхностей изготовленных деталей, которая требует много времени.
Наш товарный ассортимент охватывает вспомогательные технологические средства для всех областей изготовления моделей и форм – от изготовления слоистых пластиков ручного формования при помощи листовой или стеклонаполненной композиции для прессования до обработки препрега. Мы предлагаем инновационные и качественные системные решения, которые помогают устранять проблемы, обусловленные рассматриваемой технологией производства.
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
подробнее
Additive to reduce surface tension in gelcoats.
подробнее
Sprayable Cleaner, designed to remove persistant plastic residues from any kind of metal surface.
подробнее
Heady-duty, solvent-based cleaning agent to remove deposits of former release agent, rubber, epoxy-, polyester- and phenolic resins from metal surfaces.
подробнее
Разделительные материалы -
(13)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
подробнее
Easy-to-use mold sealer, suited for the purpose of processing thermosets, EP, polyester and phenolic resins on metal moulds.
подробнее
Solvent-based, semi-permanent release agent, suitable for the purpose of processing thermosets, EP, polyester and phenolic resins.
подробнее
Semi-permanent, solvent-based release agent for the purpose of processing thermoset materials. Release Agent Mikon® 305 significantly enhances slip properties and features a simple application.
подробнее
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
подробнее
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
подробнее
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
подробнее
Water-based, semi-permanent mould sealer for the purpose of processing polyester, epoxy and phenolic resins. Sealer Mikon® W-19 is being mainly used in thermoset-based applications
подробнее
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
подробнее
Water-based, semi-permanent mould release agent for plastic and metal moulds alike. Release Agent Mikon® W-30 features a really simple application and product handling.
подробнее
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
подробнее