Резинотехнические детали
Мы знаем толк в резиновых изделиях. Продажа разделительных материалов у нас происходит не в офисе. Чтобы понять требования наших заказчиков, мы отправляемся на место и изучаем проблему. Сотрудники выездных подразделений прошли обучение по тем отраслям промышленности, в которых они консультируют клиентов. Истории Чарльза Гудьира и Джона Бойда Данлопа, который из ирландского фермера превратился в производителя шин, нам так же хорошо известны, как и написание термина "акрилонитрил-бутадиен-каучук" (NBR). Понимание свойств материалов и потребностей наших клиентов позволяет нам целенаправленно разрабатывать новые продукты. Полностью оборудованная испытательная лаборатория позволяет проводить внутренние испытания изделий, прежде чем занимать ими производственные мощности наших клиентов.
Разделительные материалы -
(28)
NEW Release Agent
• especially for polymer concrete
production
• liquid wax which can be applied
easily
• Release film resistant against
abrasive fillers
подробнее
NEW Release Paste for the composite sector
• Improved version of the successful
release paste MP-7017
• Better polishing
подробнее
Additive, acts as an internal release agent to increase slip and avoid migration to the surface.
подробнее
Release Agents for the purpose of processing PU foams and PU elastomers
- low dosage
- high effectiveness
- all-puporse for the PU sector
подробнее
Crosslinking lubricant for the coating of profiles.
подробнее
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
подробнее
Solvent-free release agent, optimized for cast urethane applications with polyester-based resins. High surface quality of the produced parts.
подробнее
Solvent-free release agent with high viscosity, optimized for polyester resins. High surface quality of the produced parts. FDA-approved.
подробнее
Water-based, silicone-free release agent for PU- rigid & semi-rigid foams. Meets the requirements of the automotive industry, suited for absorbers, etc.
подробнее
Bladder Coating, especially developed for the production of driving belts
- water based
- semi-permanent
- improved surface quality of the
finished product
подробнее
Bladder Release Agent for the production of Air Spring Systems
- water-based
- semi-permanent
- improved surface quality of the
finished product
подробнее
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
подробнее
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
подробнее
Solvent-based, semi-permanent release agent, suited for the purpose of processing polymer concrete.
подробнее
Our Release Agent Mikon® F-58 is a further development of the well-proven Mikon® F-57 – with an even higher performance.
подробнее
Solvent-based, wax-containing release agent, specifically developed for the purpose of processing polymer concrete.
подробнее
Release Agent, quickly ventilating. Especially for processing polymer concrete, mineral casting as well as abrasive fillers.
подробнее
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
подробнее
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
подробнее
Silicone-free multi-purpose release agent, suited for the purpose of processing thermoplastics. Even small quantities result in superior release effect.
подробнее
Silicone-free multi-purpose release agent, suited for the purpose of processing thermoplastics. Even small quantities result in superior release effect.
подробнее
Suitable for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
подробнее
Release Agent for the purpose of processing PU foams:
- reduced solid content
- polyoil-free
- all-purpose for the PU sector
- surface quality meets automobile
requirements
подробнее
Semi-permanent, external release agent, free from solvents andsuited for Rotation Molding with any kind of elastomer.
подробнее
Semi-permanent, water-based Release Agent for rotational moulding.
подробнее
Solvent-based multi-purpose release agent containing a careful selection of waxes. It is suitable for the purpose of processing polyurethane and polyester resins
подробнее
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
подробнее
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
подробнее
Additive, acts as an internal release agent to increase slip and avoid migration to the surface.
подробнее
Additive to reduce surface tension in gelcoats.
подробнее
Средства для улучшения скольжения -
(2)
Crosslinking lubricant for the coating of profiles.
подробнее
Water-based, "ready-to-use" - lubricant for the assembly of profiles.
подробнее
Water-based heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface
подробнее
Solvent-free heavy-duty-cleaning agent to remove persistant deposits from almost any kind of metal surface even at room temperature.
подробнее
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
подробнее
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
подробнее
SAN-based cleaning compound for extruders and injection machines for the purpose of processing thermoplastics
подробнее
PE-based cleaning compound for extruders and injection machines for the purpose of processing thermoplastics
подробнее
Screw cleaner for the purpose of processing thermoplastics in extrusion and injection moulding machines. The careful selection of high grade additives empower you to cut down on time, material and overall costs at once. At the same time, ScrewClean SR-47®
подробнее
Wax-based Anti-corrosive suited for all common metal surfaces.
подробнее
Internal release agents -
(3)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing epoxy resin.
подробнее