Энергия ветра
Лопасть ветрового колеса – это не просто деталь из стеклопластика. Лопасть представляет собой высокотехнологичный элемент, в отношении качественных характеристик ее конструкцию можно сравнить с конструкцией пассажирского самолета. В соответствии с особенностями отрасли к качеству применяемых материалов предъявляются очень высокие требования.
К способу нанесения покрытия предъявляются значительные требования, которые обусловлены размером соответствующих форм. Тем временем успех при нанесении покрытия в значительной степени зависит от применяемой системы разделения.
Свои системы разделения мы разрабатываем не в масштабах лаборатории, а при помощи торговых партнеров, действующих по всему миру, – непосредственно на вашем предприятии.
В области систем разделения мы можем предложить Вам "ноу-хау" высочайшего уровня, которые проверены практикой.
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
подробнее
Additive to reduce surface tension in gelcoats.
подробнее
Sprayable Cleaner, designed to remove persistant plastic residues from any kind of metal surface.
подробнее
Heady-duty, solvent-based cleaning agent to remove deposits of former release agent, rubber, epoxy-, polyester- and phenolic resins from metal surfaces.
подробнее
Разделительные материалы -
(13)
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
подробнее
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
подробнее
Additive, acts as an internal release agent for the purpose of processing PU-rigid foams. Post-processing capabilities of the castings are not impaired.
подробнее
Easy-to-use mold sealer, suited for the purpose of processing thermosets, EP, polyester and phenolic resins on metal moulds.
подробнее
Solvent-based, semi-permanent release agent, suitable for the purpose of processing thermosets, EP, polyester and phenolic resins.
подробнее
Semi-permanent, solvent-based release agent for the purpose of processing thermoset materials. Release Agent Mikon® 305 significantly enhances slip properties and features a simple application.
подробнее
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
подробнее
Solvent-based, semi-permanent release agent. It is easy to use and allows a high number of possible demouldings.
подробнее
Solvent-based, semi-permanent release agent, that significantly enhances the desired slip properties. It is easy to use and allows a high number of possible releases per application.
подробнее
Water-based, semi-permanent mould sealer for the purpose of processing polyester, epoxy and phenolic resins. Sealer Mikon® W-19 is being mainly used in thermoset-based applications
подробнее
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
подробнее
Water-based, semi-permanent mould release agent for plastic and metal moulds alike. Release Agent Mikon® W-30 features a really simple application and product handling.
подробнее
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
подробнее