Münch Chemie International
Разделительные материалы - профессионально

Additive Mikon® INT-672

Применение: Internal release agents

Additive Mikon® INT-672 is a liquid internal release agent for the processing of composites, that was especially optimized for the application with epoxy resins. This product eliminates the need for any external release agent and polishing. Because of its release power, a smooth release is obtained.

Additive Mikon® INT-672 will not have an influence on the chemical and physical properties of the resin. Any post-moulding operation such as painting, glueing, printing etc. can be performed without having to prepare the part before.

Additive Mikon® INT-672 is used as internal release agent for epoxy resins, polyester resins, acrylic resins and SMC.

Свойства

  • Высокая эффективность разделения
  • Рецептура без содержания воска
  • Не оказывает негативного действия на химические и физические свойства смолы
  • Последующая обработка изготовленных деталей без предварительной обработки
  • Рецептура без содержания силикона
  • Позволяет сократить применение посторонних смазок для форм

Области применения

  • Сложный полиэфир
  • Эпоксидная смола
  • SMC
  • Акриловая смола

Документы

Упаковка

канистра
бочка
около 30 ltr.
около 200 ltr.

Продукт применяется для следующих производств

Продукция

  • Пластик
  • Композиционные материалы

Отраслевые решения

  • Автомобильные комплектующие
  • Авиационная и космическая техника
  • Резинотехнические детали

Наши рекомендации по использованию дальнейших продуктов

Release Agent Mikon® F-57
Solvent-based, semi-permanent release agent, suited for the purpose of processing polymer concrete.
Additive Mikon® INT-250
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester resin.
Additive Mikon® INT-260
Additive, acts as an internal release agent, specifically suited for the purpose of processing polyester and epoxy resin.
Release Agent Mikon® MG-9006
Solvent-based, wax-containing release agent, specifically developed for the purpose of processing polymer concrete.
Additive Mikon® MIK-255
Additive to reduce surface tension in gelcoats.
Sealer Mikon® 699 MC
Semi-permanent high-tech mould sealer, based on a careful selection of the latest high-performance solvents. Sealer Mikon® 699 MC is suited for the processing of any kind of thermoset material.
Sealer Mikon® W-29
Water-based, "easy-to-use" - mould sealer for the purpose of processing polyester, epoxy and phelolic resins on plastic or metal moulds.
Cleaner R-51
Heavy-duty, solvent-based cleaning agent to remove deposits of epoxy, polyester and phenolic resins, waxes, release agents and PUR from metal surfaces.
Cleaner Mikon® R-52
Solvent-based 'heavy duty' - cleaning agent, intended for the treatment of metal dies and similar objects at room temperature.
Mikon®-series mould sealer