Münch Chemie International
Разделительные материалы - профессионально

Anti-Corrosive MAC-7132

Применение: Антикоррозийное

Anti-Corrosive MAC-7132 is a water-based product to treat metal surfaces. The product has been developed specifically to protect metal moulds from corrosion during storage. The special composition with high quality raw materials allows to eliminate solvent in the formulation.

Other than standard anti-corrosive products, Anti-Corrosive MAC-7132 allows an immediate coating (e.g. release agent) on the treated surface without extra cleaning.

Anti-Corrosive MAC-7132 is suitable for applications on all common metal surfaces.

Свойства

  • Рецептура без содержания растворителя
  • Рецептура на основе воды
  • Формы перед применением можно не чистить

Области применения

  • Все обычные металлические поверхности
  • Рабочая температура до 260 °C

Документы

Упаковка

канистра
бочка
около 30 ltr.
около 200 ltr.

Продукт применяется для следующих производств

Продукция

  • Резина

Отраслевые решения

  • Резинометаллические соединения
  • Шинная промышленность

Наши рекомендации по использованию дальнейших продуктов

Release Agent MK-100
Solvent-based release agent for elastomer- and epoxy resin- applications even at high temperatures. Not suited for silicone-rubber.
Release Agent MK-100 Spray
Sprayable and solvent-based multi-purpose release agent for the rubber processing industry
Release Agent MK-122/5 LS
Solvent-based, semi-permanent release agent spray, suitable for the purpose of processing all common elastomer types except silicone-rubber.
Release Agent MK-200
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Free of solvents and silicone.
Release Agent MK-222
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. Release Agent MK-222 offers a solvent-free formulation and thermal stability up to approx. 300°C.
Release Agent MK-222/G5
Semi-permanent release agent for tire manufacturing, equipped with special slip additives to reduce demoulding forces.
Release Agent MK-2500
Water-based, semi-permanent release agent concentrate for the purpose of processing all common rubber types except silicone-rubber.
Release Agent MK-4103
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-4104
Water-based, semi-permanent release agent for the purpose of processing silicone-rubber, peroxide-cured compounds or the hot-forming of elastomers.
Release Agent MK-444
Water-based, semi-permanent release agent for the manufacturing of tires. Temperature-stable up to 300°C and free of solvents and silicone
Release Agent MK-51/11
Water-based, semi-permanent release agent for the purpose of processing all common elastomers (except silicone-rubber) and tire types.
Release Agent MK-57/11
Water-based, semi-permanent release agent, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-57/11 Spray
Water-based, semi-permanent release agent spray, optimized for the purpose of processing EPDM-, HNBR-& FKM- compounds. Free of solvent and ready-to-use out of the box.
Release Agent MK-58/15/G5
Water-based, semi-permanent release agent, slip-enhancing and optimized for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Release Agent MK-7070
Water-based release agent for the purpose of processing all common elastomer types except silicone-rubber. Free of solvent and ready-to-use out of the box.
Lubricant MK-7078
Crosslinking lubricant for the coating of profiles.
Release Agent MK-7082/G2
Water based "ready-to-use" - release agent. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomere and the release agent.
Release Agent MK-7083/11/G5
Water-based "ready-to-use" - release agent, forming a coherent release film on the mould. The product contains a slip agent, resulting in remarkably smooth surfaces, significantly reducing the friction between the elastomer and the release agent.
Release Agent MK-7085/11/G5
Semi-permanent release agent for the purpose of processing any kind of elastomer except silicone rubber. Very low demoulding forces required, due to lubricating additives.
Release Agent MK-7107/1
Water-based release agent concentrate, forming a coherent release film on the mould and suited for the purpose of processing all rubber types, especially EVA-compounds.
Release Agent MK-7107/2
Water-based, semi-permanent mould release agent concentrate for the purpose of processing EVA-compounds.
Release Agent MK-750
Semi-permanent, solvent-based mould release agent, to enhance slip. Compatible to all common elastomer types and metal moulds.
Release agent of the MK-series